The 2-Way Solenoid Valve is a DC actuated isolation valve design that allows the user to switch a single flow path on or off. The valve consists of an inlet and normally closed port, which is in the closed position when the valve is deenergized.
Physical
• Height 1.43 ” (without pins)
• Housing Diameter: 1.0”
• Mass: 82g
Environmental
• Operating Temperature of 10 to 40C
• Operating Humidity of 5 to 95% RH, non-condensing at 40 C
• Storage Temperature of -25 to 85 C
Mechanical
• Orifice Diameter: 0.054”
• Internal Volume: 66ul
• *Rated Pressure: Vacuum up to 100psi
• *Standard Pneumatic Flow: 2.4L/MIN (5 SCFH) minimum at **Vacuum.
• Duty Cycle: 50% Sugg. Max Energize: 300s rated voltage.
Interface and Power
24-Volt Option
Current: .16 amps
*Power: 4.0 watts
Resistance: 144 ohms
Holding Voltage: 12-Volts
Terminals: 18” 26 AWG Wires
(1 White, 1 Blue & White)
|
12-Volt Option
Current: .33 amps
*Power: 4.0 watts
Resistance: 36 ohms
Holding Voltage: 6-Volts
Terminals: 18” 26 AWG Wires
(1 White, 1 Red & White)
|
Chemical
• Wetted Materials: PCTFE, PTFE
* Standard valve specifications may be adjusted to desired operating parameters upon request.
** Vacuum pressure: -25inHg maximum at 2750ft elevation (1psia max).
***Mounting hardware is not supplied.
Recommended for use with 35 micron filtration
|
 |
|
|
|
