 |
 |
 Click here for the 80 Series 2-Way Mini-Solenoid Valve
Click here for the 80 Series 3-Way Mini-Solenoid Valve
Click here for the 81 Series 2-Way Micro-Mini-Solenoid Valve
The 2-Way Mini-Solenoid Valve is a DC actuated isolation valve design that allows the user to switch a single flow path on or off. The valve consists of an inlet and outlet port, which is in the closed position when the valve is de-energized.
Physical
• Height 1.64” (without pins)
• Housing Diameter: .505”
• Mass: 23.8g
 Environmental
• Operating Temperature of 10 to 40C
• Operating Humidity of 5 to 95% RH, non-condensing at 40 C
• Storage temperature of –25 to 85 C
• WEEE & RoHS compliant
Mechanical
• Orifice Diameter: .030”
• Internal Volume: 35.8ul
• Zero Dead Volume: No un-swept paths
• *Rated Pressure: **Vacuum to 30psi
• Mount Style: Manifold Clamp / Knurled Screw
• *Standard Pneumatic Flow: 1.4 L/MIN (3 SCFH) minimum at **Vacuum.
• *Standard Open Response Time: @30psi < 100ms @**Vacuum <750ms
• Duty Cycle: 50% Sugg. Max Energize: 300s rated voltage.
Interface and Power
24-Volt Option
Current: .16 amps
Power: 1.7 watts
Resistance: 144 ohms
Holding Voltage: 12-Volts
Terminals: 18” Wires or Pins
|
12-Volt Option
Current: .33 amps
Power: 1.7 watts
Resistance: 36 ohms
Holding Voltage: 6-Volts
Terminals: 18” Wires or Bronze Pins
|
Chemical
• Elastomer Diaphragm Options: EPDM, FKM, FFKM.
• Wetted Materials: Peek, Selected Diaphragm Material
* Standard valve specifications may be adjusted to desired operating parameters upon request (special).
** Vacuum pressure: -25inHg maximum at 2750ft elevation (1psia max).
***Mounting hardware is not supplied with standard 2-way Clamp Mount Design.
Recommended 35 micron filtration
 The 3-Way Mini-Solenoid Valve is a DC actuated isolation valve design that allows the user to switch between 2 port positions for flow path control. The valve consists of a Common port, a Normally Open Port, and a Normally Closed Port. Flow will travel through the ‘Common’ to the ‘Normally Open” position while the coil is deenergized. When energized, flow will travel from the ‘Common’ to the ‘Normally Closed’ position.
Physical
• Height 1.90 ” (without pins)
• Housing Diameter: .625”
• Mass: 35.2g
Environmental
• Operating Temperature of 10 to 40C
• Operating Humidity of 5 to 95% RH, non-condensing at 40 C
• Storage temperature of –25 to 85 C
• WEEE & RoHS compliant
Mechanical
• Orifice Diameter: .040”
• Internal Volume: 42ul
• Zero Dead Volume: No un-swept paths
• *Rated Pressure: **Vacuum to 40psi
• Mount Style: Manifold Clamp / Knurled Screw
• *Standard Pneumatic Flow: 1.4L/MIN (3 SCFH) minimum at **Vacuum.
• *Standard Open Response Time: @40psi < 100ms @**Vacuum <750ms
• Duty Cycle: 50% Sugg. Max Energize: 300s rated voltage.
Interface and Power
24-Volt Option
Current: .16 amps
Power: 4.0 watts
Resistance: 144 ohms
Holding Voltage: 12-Volts
Terminals: 18” Wires or Pins
|
12-Volt Option
Current: .33 amps
Power: 4.0 watts
Resistance: 36 ohms
Holding Voltage: 6-Volts
Terminals: 18” Wires or Bronze Pins
|
Chemical
• Elastomer Diaphragm Options: EPDM, FKM, FFKM.
• Wetted Materials: Peek, Selected Diaphragm Material
* Standard valve specifications may be adjusted to desired operating parameters upon request (special).
** Vacuum pressure: -25inHg maximum at 2750ft elevation (1psia max).
***Mounting hardware is not supplied with standard 3-way Clamp Mount Design.
Recommended 35 micron filtration
The 2-Way Micro-Mini-Solenoid Valve is a DC actuated isolation valve design that allows the user to switch a single flow path on or off. The valve consists of an inlet and outlet port, which is in the closed position when the valve is de-energized.
Physical
• Height 1.58” (without pins)
• Housing Diameter: .250”
• Mass: 5.25g
Environmental
• Operating Temperature of 10 to 40C
• Operating Humidity of 5 to 95% RH, non-condensing at 40 C
• Storage temperature of –25 to 85 C
Mechanical
• Orifice Diameter: .020”
• Internal Volume: 417ul
• Zero Dead Volume: No un-swept paths
• *Rated Pressure: **Vacuum to 20psi inlet N.C. port Vacuum to 30psi inlet common port
• Mount Style: Manifold Clamp / Knurled Screw
• *Standard Pneumatic Flow: 1.4 L/MIN (3 SCFH) minimum at **Vacuum.
• *Standard Open Response Time: @20psi < 100ms @**Vacuum <750ms
• Duty Cycle: 50% Sugg. Max Energize: 300s rated voltage.
Interface and Power
24-Volt DC Option
Current: .062 amps
Power: 1.5 watts
Resistance: 384 ohms
Voltage: 10vdc
Terminals: Pins
|
12-Volt DC Option
Current: .125 amps
Power: 1.5 watts
Resistance: 96 ohms
Holding Voltage: 5vdc
Terminals: Pins
|
5-Volt DC Option
Current: .300 amps
Power: 1.5 watts
Resistance: 17 ohms
Holding Voltage: 3vdc
Terminals: Pins
|
Chemical
• Elastomer Diaphragm Options: EPDM, FKM, FFKM.
• Wetted Materials: Peek, Selected Diaphragm Material
* Standard valve specifications may be adjusted to desired operating parameters upon request (special).
** Vacuum pressure: -25inHg maximum at 2750ft elevation (1psia max).
***Mounting hardware is not supplied with standard 2-way Clamp
Recommended 35 micron filtration
|
|
 |
|
|
|
|
|
